Discover jobs
Job Search
drywall installer
Posted on September 06, 2024 by Employer details Zamir & Company Inc
Job details
Education: College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 years. Tasks: Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Cure freshly plastered surfaces. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Mould and install ornamental plaster panels, cornices and trim. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install exterior and interior steel studs. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Install vapour barriers and thermal and sound insulation. Utilize laser alignment system. Erect and install scaffolding, falsework and other working platforms. Experience: 7 months to less than 1 year.- LocationBrampton, ON
- Workplace information On site
- Salary$35.45HOUR hourly / 35 hours per week
- Terms of employment Permanent employmentFull time
- Day, Evening, Weekend, Shift, Overtime, Morning
- Start date Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3070953
Overview
Languages
English
Education
- College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 years
Experience
7 months to less than 1 year
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Cure freshly plastered surfaces
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Mould and install ornamental plaster panels, cornices and trim
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
- Attach metal or gypsum lath to studs or furring
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install exterior and interior steel studs
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Install vapour barriers and thermal and sound insulation
- Utilize laser alignment system
- Erect and install scaffolding, falsework and other working platforms
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.
Advertised until
2024-10-06
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: