Discover jobs
Job Search
drywall installer and finisher
Posted on October 10, 2024 by Employer details Mahal Construction And Renovations
Job details
Education: Secondary (high) school graduation certificate. Work site environment: Dusty. Noisy. Tasks: Apply successive coats of compound and sand seams and joints. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Measure, cut, fit and install drywall sheets. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Work conditions and physical capabilities: Bending, crouching, kneeling. Physically demanding. Repetitive tasks. Weight handling: Up to 23 kg (50 lbs). Own tools/equipment: Hard hat. Safety glasses/goggles. Steel-toed safety boots. Experience: 1 year to less than 2 years.- LocationBrampton, ON
- Workplace information On site
- Salary$36.00HOUR hourly / 40 to 50 hours per week
- Terms of employment Permanent employmentFull time
- Evening, Weekend, On Call, Flexible Hours, Early Morning
- Starts as soon as possible
- vacancies 1 vacancy
- Source Job Bank #3114074
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 year to less than 2 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- Dusty
- Noisy
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Measure, cut, fit and install drywall sheets
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
Additional information
Work conditions and physical capabilities
- Bending, crouching, kneeling
- Physically demanding
- Repetitive tasks
Weight handling
- Up to 23 kg (50 lbs)
Own tools/equipment
- Hard hat
- Safety glasses/goggles
- Steel-toed safety boots
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-11-21
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: